PS Slat Wall Panels Installation Instructions

Tools and Materials Needed:

• PS Slat Wall Panels

• Level

• Measuring Tape

• Silicone Glue or Liquid Nails

• Stick or Spreader (for adhesive application)

• Safety Gloves

​​

Step 1: Prepare the Wall

• Clear the area and ensure the wall is clean, dry, and free of defects.

Step 2: Measure and Cut Panels

• Measure the wall area and cut the panels to size as needed. Sand any rough edges if necessary.

Step 3: Plan the Layout

• Dry fit the panels on the floor to visualize the arrangement, then mark your starting point on the wall.

Step 4: Install Panels

• Position the panel against the wall, ensuring it’s straight using a level.

• Apply silicone glue or Liquid Nails to the back of the panel and press it firmly onto the wall.

Step 5: Finishing Touches

• Clean up any excess adhesive that may have squeezed out during installation.

Step 6: Allow to Set

• Allow the adhesive to cure for the recommended time (usually 24 hours).

Safety Tips:

• Always wear safety gloves and ensure good ventilation while working with adhesives.