Interior WPC Slat Wall Panels Installation Instructions

Tools and Materials Needed:

• WPC Slat Wall Panels

• End Caps (optional, for corners/windows/doors)

• Level

• Measuring Tape

• Small Metal Clips (preferred)

• Flat Nails or Screws (for securing clips)

• Silicone Glue (optional, for additional strength)

• Stick or Spreader (for adhesive)

• Safety Gloves

Step 1: Prepare the Wall
Clear the area and ensure the wall is clean, dry, and free of defects.

Step 2: Measure and Cut Panels
Measure the wall area and cut panels to size. Sand any rough edges if necessary.

Step 3: Plan the Layout
Dry fit the panels on the floor and mark your starting point on the wall.

Step 4: Install Panels
Position the panel, ensuring it’s straight with a level. Secure with small metal clips, and for added strength, you can also apply silicone glue to the back of the panel.

Step 5: Add End Caps (Optional)
For a seamless finish around corners, windows, or doors, cut and install end caps using clips and silicone glue for added durability.

Step 6: Finishing Touches
Clean up any excess debris from the installation.

Step 7: Allow to Set
Let everything cure for the recommended time (usually 24 hours).

Safety Tips: Always wear safety gloves and ensure good ventilation when working.